Mfg Engineering

716-652-4510

  • Home
  • About
  • Blog
  • TARIFFS
  • CAM
    • EspritCAM
    • EspritSolidMill
    • EspritSolidTurn
    • MFProgrammer
    • BobcadCAM
    • GibbsCAM
    • ShopCAM
    • CompactII
  • Formats
    • MCUcode
    • Gcode
    • CustomMacro
    • HeidenhainH
    • Siemens840D
    • SiemensC200
  • CAD
    • CAD2d
    • CAD3d
  • Tooling
    • PresetBOMs
    • 4thAxisFixtures
    • RotateTiltFixtures
    • CustomCuttingTools
    • ToolManagement
  • RATES
  • More
    • Home
    • About
    • Blog
    • TARIFFS
    • CAM
      • EspritCAM
      • EspritSolidMill
      • EspritSolidTurn
      • MFProgrammer
      • BobcadCAM
      • GibbsCAM
      • ShopCAM
      • CompactII
    • Formats
      • MCUcode
      • Gcode
      • CustomMacro
      • HeidenhainH
      • Siemens840D
      • SiemensC200
    • CAD
      • CAD2d
      • CAD3d
    • Tooling
      • PresetBOMs
      • 4thAxisFixtures
      • RotateTiltFixtures
      • CustomCuttingTools
      • ToolManagement
    • RATES

716-652-4510

Mfg Engineering
  • Home
  • About
  • Blog
  • TARIFFS
  • CAM
    • EspritCAM
    • EspritSolidMill
    • EspritSolidTurn
    • MFProgrammer
    • BobcadCAM
    • GibbsCAM
    • ShopCAM
    • CompactII
  • Formats
    • MCUcode
    • Gcode
    • CustomMacro
    • HeidenhainH
    • Siemens840D
    • SiemensC200
  • CAD
    • CAD2d
    • CAD3d
  • Tooling
    • PresetBOMs
    • 4thAxisFixtures
    • RotateTiltFixtures
    • CustomCuttingTools
    • ToolManagement
  • RATES

Videos Fanuc Macro B Custom Templates

CUSTOM MACRO B THREAD ID

  • ID climb milling from the NPT thread bottom up ramping on and off with cutter diameter compensation using an equivalent cutter as illustrated.
  • For different thread sizes and different material types, grades and conditions, change the parameter variables accordingly.
  • Add multiple roughing and a finishing and a spring pass where required.
  • Caution: requires proven CNC machinist programmer skills for initial release setup, run and prove-out.
  • Thread mills, holders and machine tools are expense on the users' own nickel. No liability of the provider.
  • Enjoy. 

VARIABLES INTERPOLATION PROGRAM

  • No math or CAM system required.
  • ID climb milling linear and circular ramp on with cutter comp and ramping off.
  • For different ID bores and cutter diameters and depths and different material types, grades and conditions, change the parameter variables accordingly.
  • Add multiple roughing and finishing and passes where required. 
  • OD circular interpolation also available, and both ID and OD with different quadrant ramping positions too.
  • Caution: requires proven CNC machinist programmer skills for initial release setup, run and prove-out. Carbide endmills, holders and machine tools are expense on the users' own nickel. No liability of the provider.
  • Enjoy.
     

Fanuc Custom Macro B Family of parts programming

Videos FANUC CUSTOM MACRO B FAMILY OF PARTS PROGRAMMING

CUSTOM MACRO B BACKPLOTTING

  • Program 1 work piece using part feature sub programs.
  • Run 2 parts with block delete on or 8 parts with it off.
  • Full simulation back plotted in this video using NC Plot.
  • Fanuc machine control Toyoda horizontal machining center.
  • Twin pallets A and B shown loading 48 extended fixture offsets.
  • Tool and part probing programs. 

BACK PLOT 4-AXIS HMC PALLET A

  •  CUSTOM MACRO B BACK PLOT AUTO LOAD WORK OFFSETS, PROBE FIXTURE OFFSETS, PALLET SHUTTLE AND CYCLE.
    .

BACK PLOT 4-AXIS HMC PALLET B

  •  CUSTOM MACRO B BACK PLOT AUTO LOAD WORK OFFSETS, PROBE FIXTURE OFFSETS, PALLET SHUTTLE AND CYCLE.
     


Copyright © 2025 - All Rights Reserved.

Webmaster, Founder

  • Home

This website uses cookies.

We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.

DeclineAccept